3D Printing PA 2200

3D printing technical parameters

• 1. One-time printing size: 700x380x580mm;
• 2. 3D printing layer thickness: 0.06mm~0.18mm;
• 3. Achievable accuracy:± 0.15 mm (Accuracy is related to geometry. It varies according to product size, printing and post-processing methods.);
• 4. Post-processing: high temperature dyeing, metal spraying, and drilling can be performed;

Characteristics Of Nylon 3D Printing Materials

Laser sintered parts made from PA 2200 have excellent material properties:

• •High strength and rigidity
• • Good chemical resistance
• • Excellent long-term unchanging behavior
• • High selectivity and detailed analysis
• • Various finishing possibilities (such as metallization, glazing, vibration milling, bathtub coloring, bonding, powder coating, flocking)
• • Biocompatible meets EN ISO 10993-1 and USP/level VI/121 °C
• • Complies with EU Plastics Directive approved for food contact 2002/72/EC (exception: high-alcohol food)

The typical application of this material is full-featured plastic parts of the highest quality. Due to its excellent mechanical properties, materials are often used to replace typical injection molded plastics. Biocompatibility allows its use, for example, for prostheses, high wear resistance enables the connection of movable parts, for example.

100 micron thick layer

Performance has very high requirements for the mechanical properties and fracture behavior of the part, especially when the part will be subjected to multi-axial loads in all three directions with selected parameter sets. Performance components are characterized by the highest degree of isotropic strength and stiffness. The thickness of 100 microns results in the choice of fine resolution and also very high surface quality and detail resolution.